Ego Power+ DA1400 Anleitung Seite 12

EN
G-1 Pin
To install the rake tine (Fig. H)
1. Insert the pin of the rake tine into the slot 1 on the
cylinder (step 1).
2. Insert the seat of the rake tine into the slot 2 on the
cylinder (step 2).
3. Guide the two pins of the tine into the slot 1, push
forward to the position at the slot 3 and the two pins
will automatically rebound in place (step 3 & 4).
H-1 Pin
H-3 Slot 2
TRANSPORTING AND STORING
◾
Remove the battery pack from the power head.
◾
Always allow the product to cool down before storing
it.
◾
Clean the product thoroughly before storing it.
◾
Store the product in a dry, well-ventilated area,
locked-up or up high, out of the reach of children.
Do not store the product on or adjacent to fertilizers,
gasoline, or other chemicals.
PROTECTING THE ENVIRONMENT
Do not dispose of electrical equipment,
used battery and charger into household
waste! Take this product to an authorized
recycler and make it available for
separate collection. Electric machines
must be returned to an environmentally
compatible recycling facility.
12
DETHATCHER ATTACHMENT — DA1400
G-2 Slot 1
H-2 Slot 1
H-4 Slot 3