Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Displaying information
The appliance first mows the edge, then the sec-
ondary area.
7.9
Setting the display contrast
If the display is difficult to read, e.g. in sunlight,
the display can be improved by changing the dis-
play contrast.
* Display contrast
1.
or
2. Increase/decrease the display contrast with
or
and accept with
7.10 Setting lock
If the setting lock is deactivated, the PIN must on-
ly be entered when acknowledging safety-rele-
vant faults.
* Safety settings
1.
or
2. Activating/deactivating the setting lock:
■
Activate
or
Activate the setting lock.
■
Deactivate
or
Deactivate the setting lock.
7.11 Recalibrating
If the position or length of the boundary cable has
been changed or the appliance no longer finds
the boundary cable, recalibration is necessary.
Reset calibration
1.
or
2. Reset loop calibration data?
3. Carrying out a calibration movement: Carry-
ing out an automatic calibration movement.
7.12 Restoring factory settings
The factory settings of the appliance can be re-
stored, e.g. before selling the appliance.
* Factory reset
1.
or
Appliance reports: Factory reset com-
pleted
8 DISPLAYING INFORMATION
The Information menu is used for displaying
machine data. No settings can be made in this
menu.
1. Call up the main menu with
* Information
2.
or
3. Select the menu item with
cept with
.
495761_c
4. Return to the main menu with
Blades service
This service displays shows in how many operat-
ing hours a blade service is required. The counter
can be reset manually. Have the blade service
carried out by an AL-KO dealer, technician or
service partner.
.
Reset the counter for blade service:
1.
Hardware
Shows information on the appliance, such as
type, year of manufacture, operating hours, serial
number, number of mowing operations, total
mowing time, number of charging cycles, total
charging time, length of the loop of the boundary
:
cable.
Software
:
Shows the software version.
automatic lawn mower up to date at all times.
Check the firmware version at regular intervals
and update it as necessary. The Robolinho up-
dater software can be found on the Internet at:
www.al-ko.com/shop/de/robolinho-autoupdater
Program Info
Shows current settings such as the total weekly
mowing time.
Failures
Shows the fault messages that last occurred with
date, time and fault code.
9 MAINTENANCE AND CARE
and moving appliance parts can lead to injury.
■
9.1
IMPORTANT! Danger from water. Water in
the automatic lawn mower and in the base station
.
leads to damage on electrical components.
■
or
and ac-
Note: The menu items are described in the
following sections.
Confirm
or
NOTE Keep the software of the Robolinho
CAUTION! Risk of injury. Sharp-edged
Always wear protective gloves during mainte-
nance, care and cleaning work!
Cleaning
Do not spray the automatic lawn mower and
base station with water.
.
47
Werbung
