Hach NT3100sc Benutzerhandbuch Seite 23

Message
Service
Calibration NO3/NO3N
Section 9 Replacement parts and accessories
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Replacement parts
Description
Wiper set, 1 mm (0.04 inch), NT3100sc
Wiper set. 2 mm (0.08 inch), NT3100sc
Wiper set. 5 mm (0.20 inch), NT3100sc
Accessories
Description
Cable extension set, 5 m (16.4 ft)
Cable extension set, 10 m (32.81 ft)
Cable extension set, 15 m (49.21 ft)
Cable extension set, 20 m (65.62 ft)
Cable extension set, 30 m (98.43 ft)
Cable extension set, 50 m (164.04 ft)
Mounting hardware system with brackets, 90° adapter, stainless steel
Includes:
Base
Fastening lug
Retaining clamp (2x)
Mounting pipe 2 m
Hardware HS
90° sensor adapter
Small parts for mounting hardware
Extension pipe 1.0 m (3.28 ft)
Extension pipe 1.8 m (5.91 ft)
Second fastening point, includes retaining clamp
Table 5 Warning and reminders (continued)
Possible cause
The time interval for factory service has
expired.
The set calibration interval has expired.
W A R N I N G
Solution
Contact technical support.
Complete a standard calibration.
Quantity
5 LXZ448.99.00002
5 LXZ448.99.00003
5 LXZ448.99.00033
Quantity
each
each
each
each
each
each
each LZY714.99.53120
each
each
2
each LZY714.99.00020
each
each LZY714.99.50000
each
each LZY714.99.00030
each LZY714.99.00040
each LZY714.99.03000
Item no.
Item no.
LZX848
LZX849
LZX850
LZX851
LZX852
LZX853
LZY827
LZY804
LZX200
LZY823
LZY822
English 23