Parkside PEKSG 85 D4 Bedienungs- Und Sicherheitshinweise Seite 9

NOTE
The declared vibration total value
u
and the declared noise emission
value have been measured in
accordance with a standard test
method and may be used for
comparing one tool with another.
The declared total vibration
u
value and the declared noise
emission value may also be used
for a preliminary assessment of
exposure.
WARNING!
m
The vibration and noise emissions
u
during actual use of the product
an di er ro the de lared values
depending on the manner in which
the tool is used, especially what
kind of workpiece is processed.
Try to minimise exposure to
vibration and noise. Examples
of measures to reduce vibration
include wearing gloves when
using the tool and limiting working
time. All parts of the operating
cycle must be taken into account
(e. g. times when the product is
s it hed o and hen it is runnin
idle in addition to the trigger time).
Safety instructions
˜ General power tool safety
warnings
WARNING!
m
Read all safety warnings,
u
instructions, illustrations and
power tool.
warnings and instructions may
result in ele tri sho k re and or
serious injury.
ailure to ollo the
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety
1) Keep work area clean and
well lit. Cluttered or dark areas
invite accidents.
2) Do not operate power tools in
explosive atmospheres, such as in
gases or dust. Po er tools reate
sparks which may ignite the dust
or fumes.
3) Keep children and bystanders
away while operating a power
tool. istra tions an ause you to
lose control.
Electrical safety
1) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools.
matching outlets will reduce risk of
electric shock.
2) Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators.
risk of electric shock if your body is
earthed or grounded.
3) Do not expose power tools to rain
or wet conditions.
a power tool will increase the risk of
electric shock.
4) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
or entangled cords increase the risk
of electric shock.
n odi ed plu s and
here is an in reased
ater enterin
a a ed
GB 9