Parkside PEKSG 85 D4 Bedienungs- Und Sicherheitshinweise Seite 16

5. Moving the saw chain onward:
S it h o the produ t (see
S it hin on o ).
6. Loosen the tension lever
the next chain link to be sharpened.
Use the adjusted stop
tension lever in the chain guide
rail .
[ 7 ]
Testing the depth gauge distance
i step
NOTE
The cutting parts of the saw chain
u
are the cutting links which consist
of a cutting tooth
gauge nib . The vertical distance
[ ]
between these two determines the
depth au e distan e A.
1. After every third sharpening:
Che k the depth au e distan e A
according to the saw chain
manufacturer's instructions.
2. ile the tip o the depth au e nib
ith a at le ound o the depth
gauge nib slightly after resetting. The
original shape must be maintained.
˜ Cleaning and maintenance
CAUTION! Risk of injury!
m
l ays s it h o the produ t
and re ove the ains plu
before cleaning, carrying out
any adjustments, maintenance
or repair work.
CAUTION! Risk of injury!
m
Use protective gloves
when working with grinding
dis s .
[ ]
16 GB
and
[ ]
and the
[ ]
and a depth
[ ]
[ ]
[ ]
CAUTION! Risk of injury!
m
Have any work on the product that
u
is not described in this user manual
performed by a professional. Only
use original parts.
Always check the product before
u
use for obvious defects such
as loose, worn or damaged
parts. Correct the positioning of
screws or other parts. Examine
the grinding disc in particular
Exchange the damaged parts.
CAUTION! Risk of burns!
m
Allow the product to cool down
u
completely before performing any
maintenance or cleaning.
˜ Cleaning
CAUTION! Risk of electric shock!
m
Never clean the product under
u
running water.
NOTICE! Risk of product
m
damage!
Do not use any cleaning agents
u
or solvents. Chemical substances
may attack the plastic parts of the
product.
NOTE
Thoroughly clean the product after
u
every use.
Clean the ventilation holes
o
the surface of the product with a soft
brush, a paint brush or cloth.
.
[ ]
and
[ ]