Werbung
Verfügbare Sprachen
Verfügbare Sprachen
b.
Wear personal protective equipment and al-
ways safety goggles.
Protective equipment such as a dust mask, non-
skid safety shoes, safety helmet or hearing pro-
tection used for appropriate conditions will reduce
personal injuries.
c.
Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or rechargeable battery,
picking up or carrying the tool.
Carrying electric tools with your finger on the
switch or connecting power tools to the power
supply when they are already switched on invites
accidents.
d.
Remove any adjusting tools or spanners/keys
before turning the power tool on.
A tool or spanner that is located in a rotating de-
vice part may result in injuries.
e.
Avoid abnormal postures.
Keep proper footing and balance at all times. This
enables better control of the power tool in unex-
pected situations.
f.
Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g.
If dust extraction and collection devices can
be mounted, make sure that they are connect-
ed and used properly.
Use of dust extraction can reduce dust-related
hazards.
h.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.
A careless action can cause severe injury within a
fraction of a second.
Power tool use and care
a.
Do not overload the device.
Use the correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired.
c.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d.
Store idle power tools out of the reach of chil-
dren and
do not allow persons unfamiliar with the power
tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of
untrained users.
e.
Maintain power tools and attachments.
Check whether moving parts function properly and
do not get stuck and whether parts are broken or
are damaged and thus adversely affect the electric
tool function. If damaged, have the power tool re-
paired before use. Many accidents are caused by
poorly maintained power tools.
f.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g.
Use the power tool, tool attachments and tool
bits etc. in accordance with these instructions.
Take into account the working conditions and the
work to be performed. Use of the power tool for op-
erations different from those intended could result
in a hazardous situation.
h.
Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
Service
a.
Only have your power tool repaired by quali-
fied specialists and only with original spare
parts.
This ensures that safety of the electric tool is main-
tained.
Safety instructions for compressors
m Attention! The following basic safety measures must
be observed when using this compressor for protection
against electric shock, and the risk of injury and fire.
Read and observe these instructions before using the
device.
Safe work
1.
Keep the work area orderly
- Disorder in the work area can lead to accidents.
2.
Take environmental influences into account
- Do not expose power tools to rain.
www.scheppach.com
GB | 23
Werbung
