1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (Fig. 1)
1.
LED work light/signal light
2.
Display indicator
3.
LED button
4.
"+" button (press to increase)
5.
Signal light button
6.
Storage compartment (accessories)
7.
USB-C port
8.
USB-A port
9.
12V connection cable port
10. "-" button (press to decrease)
11. Operating mode button
12. ON/OFF switch
13. Compressed air hose mount
14. Connection cable (12V direct current)
15. Conical adapter (inflatable dinghy)
16. Dunlop valve (bicycle)
17. Ball needle
18. Compressed air hose
19. USB cable
20. Battery charge status indicator
3. Scope of delivery
Item
Quantity
1x
9
1x
19
1x
18
1x
16
1x
15
2x
17
1x
1x
4. Proper use
This device is suitable for inflating car, motorcycle and
bicycle tyres, sports balls, beach balls, air mattresses
and similar objects.
www.scheppach.com
Designation
Cordless hand-held compressor
12V connection cable
USB cable
Compressed air hose
Dunlop valve
Conical adapter
Ball needle
Operating manual
GB | 21