Parkside Performance PPFSA 40-Li B3 Originalbetriebsanleitung Seite 46

GB MT
Operation
• Wear eye protection, long trousers
and sturdy shoes throughout the
period of machine use.
• Pay attention, be aware of what
you are doing and take the utmost
care when working with the device.
Do not use the device if you are
tired or you are under the influence
of drugs, alcohol or medication.
• Use the machine only in daylight or
with good artificial lighting.
• Operation of the device in bad
weather is to be avoided, espe-
cially if there is a risk of lightning.
• Avoid operating the device when
the grass is wet.
• Do not work on overly steep
slopes.
• Always keep your hands and feet
away from the cutting equipment,
especially while starting the motor.
• Warning! Do not touch moving
dangerous parts until the battery
has been removed and the moving
dangerous parts have come to a
complete stop.
• Never replace the non-metallic
cutting unit with a metallic cutting
unit.
• Avoid an abnormal body posture.
Ensure secure footing at all times
to maintain balance when working
on slopes.
• Go slowly. Do not walk with the
device in your hand.
• Make sure to keep the ventilation
openings free of foreign objects.
• Switch off the device and remove
the battery (33). Make sure that all
moving parts have come to a com-
plete stop
• when leaving the device,
• before removing obstructions or
loosening blockages,
46
• before checking the device,
cleaning it or performing main-
tenance work on it.
• After contact with a foreign ob-
ject,
• if the machine begins to vibrate
in an unusual way.
• If the device starts to vibrate ab-
normally, an immediate check is
required, remove the batteries and:
• examine for loose parts and
tighten these,
• search for signs of damage,
• replace damaged parts. contact
the service centre.
• If an accident or malfunction oc-
curs during operation, switch off
the device immediately. Injur-
ies must be properly treated or
medical assistance sought. Read
the "Troubleshooting" section to
correct any malfunctions or con-
tact our Service Centre.
• Only use accessories recom-
mended by PARKSIDE. Unsuit-
able accessories may cause elec-
tric shock or fire.
Cleaning, maintenance and storage
• Switch off the drive and remove
the battery. Wait until all moving
parts have stopped and allow the
device to cool down when the
device is stopped for maintenance,
repair, storage or replacement of
an accessory.
• Replace worn or damaged parts in
the interests of safety. Use only ori-
ginal spare parts and accessories.
Using externally produced parts
results in the immediate loss of any
warranty claim.
• Check and maintain the machine
regularly. Only have the machine
repaired at an authorised work-
shop.