Additional Safety Rules - Parkside Performance Ppfsa 40-Li B3 Originalbetriebsanleitung

5. Ensure you wear suitable cloth-
ing. The clothing must be fit for
purpose and must not hinder you
when you are working. Wear cloth-
ing with cut resistant inserts.
6. Use personal protective equip-
ment. Wear safety shoes with
steel toecaps/steel soles and non-
slip soles. Wear a safety helmet if
the work entails a risk of falling ob-
jects.
7. Wear safety goggles. Objects
may be thrown towards you. This
may result in severe eye injuries.
8. Wear ear protection. Wear per-
sonal hearing protection, e.g. ear
plug.
9. Hand protection
Wear sturdy gloves – leather
gloves provide good protection.
10. Operating the device
Never work without the appropri-
ate protective cover. Risk of injury
due to ejected objects.
11. Remove all socket wrenches
etc. All wrenches/keys and similar
must be removed before switching
on the device.
12. Always remain attentive. Pay
attention to what you are do-
ing. Use common sense. Do not
use any motorised tools when you
are tired. You may not operate the
device under the influence of alco-
hol, medication or drugs that im-
pair your ability to react.
13. Look out for damaged parts. If
the device suffers a heavy impact
or is dropped, check it for signs of
damage and wear before putting
it back into operation. Are indi-
vidual parts damaged? In the case
of slight damage, carefully reflect
on whether the tool will still work
properly and safely. Ensure mov-
ing parts are correctly aligned and
set up. Are the parts interlocking
properly? Are parts damaged? Is
everything correctly installed? Are
all other requirements for proper
functioning met? Damaged safety
equipment etc. must be properly
repaired or replaced by authorised
persons, unless otherwise indic-
ated in the instruction manual. De-
fective switches must be replaced
by an authorised entity. If repairs
are need, contact a customer ser-
vice centre authorised by us.
14. Only use approved parts. Only
use identical spare parts for main-
tenance and repairs. Spare parts
are available from our online shop
(see Spare parts and accessories,
p. 60).
WARNING! The use of other
mower heads as well as accessor-
ies and attachments that are not ex-
pressly recommended can endanger
people and property. The tool may
only be used for the intended pur-
pose. Any use other than for the in-
tended purpose is considered im-
proper use. The user is solely re-
sponsible for property damage and
personal injury resulting from such
improper use; the manufacturer bears
no liability under any such circum-
stance. The manufacturer cannot be
held liable if its machines are modi-
fied or used improperly and if this res-
ults in damage to people or property.

Additional safety rules

To prevent personal injury and
damage to property:
1. Attention! Always keep your
hands and feet away from the cut-
ting area, especially when starting
the device. Always keep your hand
free on the auxiliary handle.
2. Always hold the device with
your hands on both handles. Al-
GB MT
43