Privacy Policy; Troubleshooting; Disposal/Environmental Protection - Parkside Performance Ppfsa 40-Li B3 Originalbetriebsanleitung

3. Confirm the dialog box.

Troubleshooting

The following table will assist you in fixing faults:
Problem
Bad cutting results
Device does not
start
Device works with
interruptions
Strong vibrations,
loud noises
Disposal/
environmental
protection
Remove the battery from the device
and recycle the device, battery,
Possible Cause
The cutting line is not
guided out of the spool
cap (30)
Cutting unit dirty
Blade (26) blunt
Rechargeable battery
(33) discharged
Rechargeable battery
(33) not inserted
On/Off button (12) de-
fective
Defective motor
Internal loose contact
Cutting unit dirty
Defective motor

Privacy policy

see Page More; Section Legal,
Privacy policy
Remedy
Replacing the spool, p. 49
Cleaning the cutting unit (see
Cleaning, p. 54)
Sharpen or replace blade (26)
Charge the battery (see the
separate operating instructions
for the rechargeable battery
and charger)
Inserting and removing the
batteries, p. 53
contact the service centre.
contact the service centre.
Contact the service centre.
Cleaning the cutting unit (see
Cleaning, p. 54)
Contact the service centre.
accessories and packaging in an
environmentally-friendly manner.
Electrical devices must not
be disposed of with domestic
waste.
GB MT
57