General Safety Instructions - Parkside Performance Ppfsa 40-Li B3 Originalbetriebsanleitung

GB MT
battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact acci-
dentally occurs, flush with wa-
ter. If liquid contacts eyes, ad-
ditionally seek medical help. Li-
quid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or
tool that is damaged or modi-
fied. Damaged or modified batter-
ies may exhibit unpredictable be-
haviour resulting in fire, explosion
or risk of injury.
f) Do not expose a battery pack or
tool to fire or excessive temper-
ature. Exposure to fire or temper-
ature above 130 °C may cause ex-
plosion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the temper-
ature range specified in the in-
structions. Charging improperly or
at temperatures outside the spe-
cified range may damage the bat-
tery and increase the risk of fire.
6. SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the
safety of the power tool is main-
tained.
b) Never service damaged battery
packs. Service of battery packs
should only be performed by the
manufacturer or authorized service
providers.

General safety instructions

Access by children as well as sick
and frail people is to be prevented.
42
Children must be carefully supervised
when in the vicinity of machinery.
Observe the regional and local acci-
dent prevention regulations applic-
able to your location. The same ap-
plies to all provisions on occupational
health and safety at work.
The manufacturer cannot be held
liable if its machines are modified
without authorisation and if such
changes result in damage to people
or property.
WARNING! Basic precaution-
ary measures are to always be taken
when using machines. Please also
observe all tips and notices in the ad-
ditional safety instructions.
1. Pay attention to the environ-
mental conditions in which you
are working. Make sure you have
a secure footing in wet conditions,
snow, ice, on slopes and on un-
even terrain.
2. Do not let third parties access
the device. Visitors and observ-
ers, especially children and sick
and frail people must be kept away
from the work area. Prevent oth-
er people from coming into con-
tact with the tools. Only pass the
device on to people who are famil-
iar with the device and its hand-
ling.
3. Ensure tools are stored securely.
Tools that are not in use must be
stored in a dry, preferably high loc-
ation, or locked away out of ac-
cess.
4. Always use the right tool for
every job. For example, do not
use small tools or accessories for
work that actually has to be done
with heavy-duty tools. Use tools
only for the purposes for which
they were designed.