Translation Of The Original Eu Declaration Of Conformity - Parkside Performance Ppfsa 40-Li B3 Originalbetriebsanleitung

Translation of the original EU declaration of
conformity
Product: 2-in-1 Cordless Brush Cutter
Model: PPFSA 40-Li B3
Serial number: 000001–011000
The object of the declaration described above is in conformity with the relevant
Union harmonisation legislation:
2006/42/EC • 2014/30/EU • 2000/14/EC & 2005/88/EC •
Product with battery Smart PAPS 204 A1/Smart PAPS 208 A1: 2014/53/EU
The object of the declaration described above is in conformity with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011
on the restriction of the use of certain hazardous substances in electrical and
electronic equipment.
To ensure conformity, the following harmonised standards and national stand-
ards and regulations have been applied:
EN 60335-1:2012/A15:2021 • EN 62841-1:2015/A11:2022
EN ISO 11806-1:2022 • EN 50636-2-91:2014 • EN 62233:2008
EN IEC 55014-1:2021 • EN IEC 55014-2:2021
Product with battery Smart PAPS 204 A1/Smart PAPS 208 A1:
EN 301 489-1 V2.2.3:2019 • Final draft EN 301 489-17 V3.3.0:2024
In accordance with the Directive 2000/14/EC relating to noise emission, the
following is confirmed: Sound power level (L
– Measured: 92.2 dB, 91.3 dB;
– Guaranteed: 94 dB
Followed conformity assessment procedure according to 2000/14/EC ,
Annex V.
This declaration of conformity is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
GERMANY
16.12.2024
2011/65/EU & (EU) 2015/863
EN IEC 63000:2018
EN 300 328 V2.2.2:2019 • EN 50663:2017
)
WA
Christian Frank
Authorised representative of docu-
mentation
GB MT
61