Werbung
When the Collision Detection is turned on, and no movement is detected after
5 minutes of recording (5-minute entry mechanism for short), then Collision
Detection is activated. Collision Detection icon will appear in the middle of the
EN
screen and the camera will automatically turn off. When the dash cam is
turned off, it will start to record for 1 minute after being shaken, then turn off
the dash cam again.
Note: If the dash cam continues to be hit during collision detection recording,
it will exit the collision detection mode and enter normal recording, restarting
the 5-minute entry mechanism.
Motion Detection
When the motion detection is turned on, the
recording interface, indicating that the dash cam is currently in motion
detection mode. Motion detection has three levels of low/medium /high that
can be adjusted, and the corresponding detection ranges for motion detection
is 6.6ft/13ft/19.7ft.
3840x2160P 30FPS
HDR
56
00:00:37
11-12-2024 14:09:07
MP/H
3840x2160P 30FPS
HDR
56
00:00:37
11-12-2024 14:09:07
MP/H
- 25 -
icon will be displayed on the
Werbung
