Werbung
Note:
1.
Please use a hardwiring kit or other stable and continuous power supply to
power the camera to ensure that the camera works properly in parking
mode.
2.
The E1 Pro operating environment temperature is 14°F to 158°F (-10°C to
70°C). We recommend selecting Collision Detection within this temperature
range, as it will automatically turn off once the temperature exceeds the
normal operating temperature range. If the temperature outside is high,
turn off the camera when parking.
3.
Time-lapse video recording and parking mode (including collision detec-
tion, motion detection, low bit rate recording, and low framerate mode) can
only be enabled one at a time. When one is enabled, the other will be
automatically disabled.
4.
All videos in parking mode(Collison Detection, Motion Detection, Low
Bitrate Recording, Low Framerate mode) will be saved in the normal folder.
In order to prevent the video in parking mode from being overwritten in a
loop, please check and save the required files in time to prevent loss.
Collision Detection
When collision detection is enabled, the
recording interface, indicating that the camera is currently using collision
detection mode. Collision detection sensitivity can be adjusted from 1 to 5
levels. You can adjust according to your habits as well as the surroundings of
the car.
icon will be displayed on the
3840x2160P 30FPS
HDR
56
00:00:37
11-12-2024 14:09:07
MP/H
- 24 -
EN
Werbung
