Werbung
B. System Setup
-Language: Available languages are Engish/Français/Español/Deutsch/
Italiano/简体中文/русский/日本語/Polski.
EN
-Wi-Fi: The default is to turn on Wi-Fi automatically. Under this function, you
can set Wi-Fi to automatically turn on or off and view Wi-Fi information.
-Display Setting: The default setting is Full Screen mode. You can switch it to
panorama mode.
-USB mode: Vantrue LTE Module and the supplied USB cable share the same
USB interface for data transfer, so the LTE data transfer mode is turned on by
default. When users need to use USB cable to transfer data, they need to
switch to USB mode.
-Voice Assistant: The default sensitivity is Standard. Voice commands can be
recognized after the option is turned on. You can choose options such as low
sensitivity/high sensitivity/standard/off.
-Voice Content: Voice recognition commands. You can use different
commands to remote control the camera.
-Format Memory Card: Format all data on the memory card.
-Format Reminder Setup: Select the reminder options: 15 Days, 1 Month,
and Off. Default is off.
To prevent you from forgetting to format the memory card regularly, we have
added a format reminder time setting. You can choose to be reminded after
15 days or 1 month, When the time is up, you can choose "OK" to format, or
choose "Next."
Note: If changing the format reminder option, the timing will restart as soon
as the option is changed.
-Date & Time: There are two ways to set the time and date:
Automatic GPS update: GPS automatic update is enabled by default.
•
The date and time will be automatically updated based on your time zone,
please select the correct time zone.
Manual date/time setting. You can choose to turn off automatic GPS update,
turn on manual date/time setting, and manually correct date and time.
- 19 -
EN
Werbung
