Werbung
When the motion Detection is turned on, and no movement is detected after
5 minutes of recording, then an orange icon will appear in the center of the
screen, and the screen will turn off after 3 minutes.
Video recording process: When the camera detects object movement, it will
automatically trigger video recording for 30 seconds. After the motion
detection recording ends, the camera will load a 15s pre-recorded video into
the 30s motion detection video and save the 45s video to the normal folder.
Note:
1.
Motion detection mode can only be engaged when the camera is turned on.
Once the camera is turned off, the motion detection mode will not work.
2.
The resolution of the motion detection pre-recording function is based on
the dashcam default resolution, and pre-recording supports 4K.
Low Bitrate Recording
When the low bitrate mode is on, the
right corner of the screen if 1080P 15FPS is selected, and the
displayed in the lower right corner of the screen if 720P 15FPS is selected.
If no movement is detected after 5 minutes of recording, there will be a
icon that appears in the center of the screen. The resolution of all current
video will be automatically switched to 1080P 15FPS or 720P 15FPS for
recording, and the recording duration is determined according to the
3840x2160P 30FPS
HDR
56
00:00:37
11-12-2024 14:09:07
MP/H
icon will be displayed in the lower
- 26 -
EN
icon will be
Werbung
