Werbung
4. Basic Operation
4.1 Menu Settings
EN
The E1 Pro dash cam has 3 function menus, which are: record settings, system
settings, and file browsing. You can set your dash cam according to your
requirements with these function setting.
Press the
enter the menu settings.
A. Record Setup
-Resolution: The E1 Pro Dash Cam includes four resolutions: 3840x2160P
30FPS, 2560x1440P 30FPS, 1920x1080P 30FPS, 1280x720P 30FPS Resolution:
-Image quality: Default standard, can choose PlatePix ™
-Loop Recording: Default setting is 1 min. You can choose among 1/2/3 mins
and OFF.
-HDR: default enabled, optional to disable.
-HDR Timer: It is turned off by default and can be selected to be turned on or
off at a set time.
-G-Sensor: Select the level of G-sensor you need, then you can set 3
directions (Front + Back/Left + Right/Up + Down). The G-sensor value in each
direction can be selected as 1/2/3/4/5/Off. The higher the sensitivity
level, the easier it is to trigger emergency recording. G-sensor is most
sensitive when set to 5.
-Audio Recording: The default is ON. Set recording to on or off.
-Exposure: The default value is +0.0. Adjust the exposure of the lens.
button, pause the video first, and then press the
Record
System
Files
- 17 -
EN
button to
Werbung
