Werbung
EN
Note:
1.
The sensitivity of the automatic locking video trigger is determined by the
sensitivity of the collision. The higher the sensitivity setting, the greater the
probability of being triggered.
2.
The total capacity of the event video file accounts for 30% of the total
capacity of the current memory card. When the event video file reaches the
upper limit, new event video file will automatically overwrite old event video
file. It is recommended to periodically check and save your event video files
to avoid loss.
3.
Lock recording will not trigger in either of the following situations: Loop
recording is off or time-lapse recording is on.
4.2.3 Parking Mode (When the parking mode is turned on, the time-lapse
video function will not work. These two functions cannot run at the same
time)
Parking Mode operates as a sentry function under different situations. You
can switch to different parking monitoring modes according to different
parking situations.
After parking mode is turned on, there are two ways to record. You can wait
for 5 minutes to restart automatically, or long press the
manually.
Files
1/4
Event Video
Normal Video
Photo
All Files
OK
Event Video
20241118_140633_0001_E...
20241118_140633_0002_E...
20241118_140633_0003_E...
20241118_140633_0004_E...
OK
- 23 -
2/5
button to begin
Werbung
