Werbung
-REC Status Light: Default setting is ON. You can choose to turn on/off the
recording status light.
-Rotate Display: Default is off. You can choose to flip the video screen up and
EN
down(180 Degree).
-Number Plate: Press the
button to select the number or letter to be set.
After setting, your license plate number can be displayed in the recorded
video.
-Stamp: Enable or disable the watermark stamp on video and photos. The
watermark stamp includes date and time label, VANTRUE label, license plate
number, GPS location information, and speed label. All enabled by default.
-Time Lapse: The default value is disabled. You can choose to enable
1FPS/5FPS/10FPS/15FPS.
-Parking monitoring mode: Here you can set the parking mode you need,
collision detection/motion detection/low bit rate recording/low frame rate
mode/off, default off.
-Parking monitoring settings: Used in conjunction with parking monitoring
mode, when you turn on parking monitoring, the parking low light night vision
is enabled by default. When using collision detection, the parking collision
detection quick start mode is enabled by default.
-LTE settings: This feature needs to be used in conjunction with Vantrue LTE
Module, and can choose message push mode and the file size of uploading
collision video. When using Vantrue LTE Module, the default message is
pushed in real-time and uploading collision videos with traffic saving mode by
default. Users can change other options.
-Mileage statistics: It is enabled by default. After enabling it, the E1 Pro dash
cam will record the driving GPS information, and you can export data and view
it in the App.
-GPS Setting: GPS is enabled by default. GPS ON/OFF settings, speed unit
settings, and GPS information are all set here.
- 18 -
Werbung
