ARGENTO Performance Pro Bedienungsanleitung Seite 23

• LCD Display - OLI Easy
Overview of controls and symbols
Description of Display On/Off functions
Press the ON/OFF button for approx. 1 second to switch on the display.
Press the ON/OFF button for 3 seconds to switch off the display.
Selecting the assisted pedalling level
Press + or – button to increase or decrease the selected pedal assist level.
There are between 1 and 5 selectable levels of pedal assist.
Assist level 1 determines the setting of the minimum electrical power provided by the motor.
Assist level 5 determines the setting of the maximum electrical power provided by the motor.
If you select level 0, you exclude electrical assistance from the motor.
Enabling walk assist mode
Select a walk assist level equal to or greater than 1 and then press the lever to enable the walk assist function, which enables
electric motor power up to a speed of 6km/h.
Disable the function by releasing the lever.
CAUTION
The walk assist function must be used in compliance with the regulations in force in the country where the product is used,
and can only be used when walking alongside the electrically power assisted cycle, keeping a proper distance from the
rotating pedal and crank, and holding the handlebar knobs firmly and with both hands.
A. LCD display
B. ON/OFF button / Pedal assist level increase
C. Front light on/off button / Pedal assist level
decrease
D. Activation lever for walk assist function
1. Indicator light for light ON
2. Digital speedometer: indicator of instantaneous speed
measured during use (km/h)
3. Selected Pedal Assist level indicator (numerical value)
4. Malfunction warning light ( ! )
5. ODO: display of total distance travelled (km)
6. TRIP: display of partial distance travelled (km)
7. Indicator light for the activation of the walk assist mode
8. Indicator light for residual battery charge
22