ARGENTO Performance Pro Bedienungsanleitung Seite 19

Overview of controls and symbols
1. Indicator light for residual battery charge
2. MENU: parameter setting menu access light
3. Digital speedometer: instantaneous speed indicator
detected during use (km/h or mile/h)
4. Malfunction warning light
5. Selected Pedal Assist Level Indicator
6. Indicator light for walk assist mode ON
7. Front light activation indicator light
8. TRIP: display of partial distance travelled (km or miles)
9. TOTAL: display of total distance travelled (km or miles)
10. MAXS: display of the maximum speed recorded during
the last use (km/h or mile/h)
11. AVG: display of the average speed recorded during the
last use (km/h or mile/h)
12. RANGE: display of estimated travel data (km or mile)
detected instantly in standard conditions and updated in real time based on the level of residual battery charge and
selected pedalling assistance level (km or mile)*.
*The autonomy of the battery supplied with the electrically power assisted cycle and, therefore, the relevant distance data
estimated in km, may vary significantly depending on the specific mode of use (total load transported, level of effort by
the rider, level of electric pedal assistance detected, how often the rider departs and restarts), mechanical and electrical
conditions of the product (tyre pressure and wear, battery efficiency level) and external influences (slopes and road surface,
atmospheric conditions).
Function description
Display on/off
Press the ON/OFF button for 2 seconds to switch the display on or off.
Selecting the assisted pedalling level
Press + or – button to increase or decrease the selected pedal assist level.
There are between 1 and 5 selectable levels of pedal assist.
Assist level 1 determines the setting of the minimum electrical power provided by the motor.
Assist level 5 determines the setting of the maximum electrical power provided by the motor.
To deactivate the electric motor support, press the - button until the display shows the numerical value of the pedalling
assistance level in use.
A. Button to change and/or increase a value (+)
B. Button to change and/or decrease a value
(-)
C. Front light and display screen backlight
on/off button
D. ON/OFF button
E. Mode button
18