Shark MATRIX PLUS RV2620WAEU Gebrauchsanweisung Seite 7

VAC & MOP 2-IN-1 CLEANING MODE
Dining Room
Kitchen
Living Room om
Whole-Home Cleaning
To start a whole-home Vac & Mop run, press the
CLEAN button on the robot or in the app. The robot
will clean perimeter areas first, then change to a row-
by-row pattern. If the fluid reservoir empties before
the whole-home run is complete, the robot will pause
for up to 10 minutes to allow you to refill the reservoir
before it returns to the base. When the whole-home
run is complete, the robot will return to its base.
Spot Clean Matrix Mop
To clean a specific 1.5m by 1.5m spot, place the robot in
the area to be cleaned, then press and hold the CLEAN
button for 5 to 7 seconds. The robot will rotate while
vacuuming and mopping the area in a matrix pattern.
Spot Clean is also available through the app.
VACUUM-ONLY CLEANING MODES
Dining Room
Kitchen
Living Room om
Whole-Home Cleaning
To activate a whole-home clean when in vacuum-only
mode, press the CLEAN button on the robot or in the
app. The robot will clean perimeter areas first, then
change to a row-by-row pattern.
Spot Clean Matrix Clean
To clean a specific 1.5m by 1.5m spot, place the robot
in the area to be cleaned, then press and hold the
CLEAN button for 5 to 7 seconds. The robot will
clean the area in a matrix pattern. Spot Clean is also
available through the app.
Single-Room Matrix Clean
Once the robot has a created map, you can select a
specific room for it to vacuum in Matrix Clean mode.
Place the robot in the room to be cleaned, then press
the CLEAN button. This function is also available
through the app.