Shark MATRIX PLUS RV2620WAEU Gebrauchsanweisung Seite 12

MAINTENANCE
CLEANING SENSORS AND CHARGING CONTACTS
CLEAN SENSORS AND CHARGING CONTACTS AS NEEDED. With a dry cloth, gently dust off the sensors
and contacts located on the bottom of the robot and on the base.
IMPORTANT: The robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when
they are dirty. For best results, clean sensors regularly.
CLEANING SIDE BRUSH
CLEAN SIDE BRUSH AS NEEDED.
NOTE: Remove and replace the side brush if it is bent or damaged. To remove the brush, lift it off its peg. Replace side
brushes every 12 months or when visibly worn.
Carefully unwind and remove any string or hair
wrapped around the side brush.
Gently wipe brush with a dry cloth. To reinstall, snap
the brush over the pegs. Spin the brush manually to
make sure it is installed correctly.
USING THE SHARK MATRIX
To get the best cleaning performance from your robot, we recommend downloading the latest version of the SharkClean® app.
USING THE SHARKCLEAN® APP AND VOICE CONTROLS
Get the most out of your robot with these app features:
• Recharge and Resume
Enable this feature to handle multi-room cleaning
in larger homes. The robot will return to the base,
recharge, and can pick up where it left off.
• Matrix Clean: Targeted deep cleaning for a specific
room or single spot.
• No-Go Zones
Use the no-go zones in the app to keep your robot
out of the areas you would like it to avoid.
How do I use my robot with Amazon Alexa?
Open the Amazon Alexa app, go to the menu and select Skills. Or go to the Alexa Skills store on the Amazon
website. Search for "Shark Skill". Select the Shark® Skill to open the detail page, then select the Enable Skill
option. Once enabled, you can ask Alexa to control your robot (i.e., "Alexa, tell Shark® to start cleaning").
How do I set up my robot with the Google Assistant on an Apple device?
1. Download, open, and sign in to the Google Assistant app. 2. Select the "Explore" icon. Search for "Shark"
and select "Try it." 3. To allow Google to link to your SharkClean® account, sign in to your SharkClean account.
This is the same account you used when setting up your Shark® robot in the SharkClean app. Select "Autho-
rize" to link your SharkClean account to the Google Assistant. To send your robot in to action, use the voice
command, "Google, tell Shark® to start cleaning."
How do I set up my robot with the Google Assistant on Android?
1. Download open, and sign in to the Google Assistant app. 2. Select the "Explore" icon. Search for "Shark"
and select "Link." 3. Sign in to your SharkClean account. This is the same account you used when setting up
your Shark® robot in the SharkClean app. To send your robot in to action, use the voice command, "Google, tell
Shark® to start cleaning."
HERE ARE SOME THINGS YOU CAN SAY TO GOOGLE ASSISTANT OR AMAZON ALEXA.
Google Assistant:
Hey Google, start vacuuming.
Hey Google, tell (robot name) to vacuum.
Hey Google, pause vacuuming.
Hey Google, tell (robot name) to go home.
Hey Google, ask Shark® to Matrix Clean my
(room name).
PLUS 2-IN-1 ROBOT
™
• Scheduling
Set up whole-home cleanings for any time,
any day.
• Control From Anywhere
Wherever you are, you're in control of your robot.
• Cleaning Reports
Each time your robot cleans, your app will generate
a cleaning report. Search for SharkClean in the app
store and download the app to your iPhone
TM
Android .
TM
• Carpet Zone
Once your robot has mapped your home, set up
Carpet Zones in the app to identify areas of your
carpeted floors you do not want your robot to
mop.
Amazon Alexa:
Alexa, ask Shark® to start vacuuming/cleaning the
(room name).
Alexa, start/stop the vacuum.
Alexa, send the vacuum to base.
Alexa, ask Shark® to Matrix Clean my (room name).
or