HMS LOOP10 Bedienungsanleitung Seite 29

CLEANING
Before cleaning or maintaining the product, always unplug the power cord of the
treadmill. Regularly remove dust to keep components clean. Be sure to clean the
exposed parts on both sides of the running belt to reduce debris accumulation
underneath. Ensure your exercise shoes are clean to prevent carrying foreign objects
that could wear down the treadmill deck and belt. Clean the surface of the running belt
with a damp cloth dipped in soapy water, being careful not to splash water onto
electrical components or underneath the running belt.
WARNINGS
Before removing the motor cover, always unplug the power cord of the treadmill. Open
the motor cover at least once a year to clean the motor of dust.
TREADMILL LUBRICATION
Lubrication oil has been pre-applied between the treadmill deck and belt of this treadmill.
The friction between the belt and deck significantly affects the lifespan and performance
of the treadmill, so regular lubrication is necessary. We recommend inspecting the deck
surface regularly. Contact our customer service center if there are any damages to the
deck surface.
Follow this lubrication schedule for the treadmill belt and deck:
Light usage (less than 3 hours per week): Once a year.
Moderate usage (3-5 hours per week): Every 6 months.
Heavy usage (more than 5 hours per week): Every 3 months.
We recommend purchasing lubrication oil from local dealers or contacting our company
directly.
Additional Tips:
To maintain your treadmill and extend its lifespan, it is recommended to turn off the
power and let the machine rest for 10 minutes after continuous use of 2 hours.
If the treadmill belt is too loose, it may slip during use; if it is too tight, it could reduce
motor performance and increase wear on the rollers and belt. The appropriate tension
allows lifting the belt on both sides approximately 50-75mm from the treadmill deck with
your hand.