Parkside Performance PABSP 20 Li C4 Originalbetriebsanleitung Seite 33
Vorschau ausblenden
Andere Handbücher für PABSP 20 Li C4:
- Bedienungs- und sicherheitshinweise originalbetriebsanleitung (273 Seiten) ,
- Originalbetriebsanleitung (114 Seiten) ,
- Bedienungsanleitung und originalbetriebsanleitung (108 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The LED work light
is intended to illuminate the immediate
work area.
Any other use or modifi cation of the
product are considered improper use
and can result in hazards such as
death, life-threatening injuries and
damage. The manufacturer is not liable
for any damages caused by improper
use. The product is not intended for
commercial use or for any other use.
The PARKSIDE app can be
used with this product when
a PARKSIDE Smart Battery
is installed.
˜ You will need (for use with the
PARKSIDE App)
Mobile device:
iOS 15.0 or higher
Android 6.0 or higher
˜ PARKSIDE app
Using the PARKSIDE app, you can
o
monitor the product and control certain
functions of the product. The extent
of controlling those functions may be
changed with fi rmware updates. For
detailed information on the PARKSIDE
app, see the user manual for the
Smart battery.
˜ Requirements
In order to search, locate and connect
o
to the PARKSIDE app, the following
requirements must be met:
–
The PARKSIDE app is installed on
your smartphone and Bluetooth
is activated.
–
PARKSIDE Smart battery,
model number PAPS 204 A1
or PAPS 208 A1, is attached to
the product.
on this product
[
]
®
–
The Smart battery is paired with the
PARKSIDE app.
–
The product can communicate
with the PARKSIDE app via the
Smart battery.
˜ Activating/deactivating the
Bluetooth
function on the
®
battery
Activate the Bluetooth
o
Press and hold the
the battery pack
The orange LED of the charging level
LEDs
lights up. The Bluetooth
[
]
function is activated.
Release the
Deactivate the Bluetooth
o
Press and hold the
the battery pack
The orange LED of the charging level
LEDs
goes off . The Bluetooth
[
]
function is deactivated. In the
PARKSIDE app the product is shown
as offl ine.
˜ Connecting the product to
the PARKSIDE app
1. Press and hold the
the battery pack
activate the Bluetooth
2. Enable the Bluetooth
your smartphone.
3. Open the PARKSIDE app.
Connecting the product for the fi rst
time to the PARKSIDE app
1. Select
{Add a
tool}
tools} tab. The PARKSIDE app scans
the area for available devices. The
PARKSIDE app indicates if available
devices have been found.
2. Tap on the product name to select the
battery pack
.
[
]
function:
®
button
on
[
]
for 3 seconds.
[
]
®
button
.
[
]
function:
®
button
on
[
]
for 10 seconds.
[
]
®
button
on
[
]
for 3 seconds to
[
]
function.
®
function on
®
or
on
the {Your
GB/IE
31
Werbung
