Parkside Performance PABSP 20 Li C4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 15

5) Maintain power tools and
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools .
6) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
likely to bind and are easier to control .
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation .
8) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations .
Battery tool use and care
1) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack .
2) Use power tools only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury and
fire.
3) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal
to another. Shorting the battery
terminals together may cause burns
or a fire.
4) Under abusive conditions,
liquid may be ejected from the
battery; avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical
help. Liquid ejected from the battery
may cause irritation or burns .
5) Do not use a battery pack
for tool that is damaged or
modified. Damaged or modified
batteries exhibit unpredictable
behaviour resulting in fire, explosion
or risk of injury .
6) Do not expose a battery pack or
tool to fire or excessive tempera-
ture. Exposure to fire or temperature
above 130 °C may cause explosion .
7) Follow all charging instruction
and do not charge the battery
pack or tool outside the
temperature range specified in the
instruction. Charging improperly or
at temperatures outside the specified
range may damage the battery and
increase the risk of the fire.
Service
1) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained .
GB 13