Scheppach 7906100716 Originalbetriebsanleitung Seite 22

13.1. Lubrication
Regular lubrication is a prerequisite for your chisel ham-
mer to function properly over the long term. Only use
the special compressed air oil included in the scope of
delivery for this purpose. Special compressed air oil can
also be obtained from specialist retailers.
Note: Use environmentally friendly compressed air oil if
the device is used outside of workshops.
The following lubrication options are available to you:
• via a misting lubricator: Connect a complete
maintenance unit with a mist lubricator between the
compressed air source and the chisel hammer. A
maintenance unit can be obtained from specialist
dealers and is not included in the scope of delivery.
• manually: Add 3-5 drops of special compressed
air oil into the compressed air connection each
time before starting the compressed air tool. If the
compressed air universal tool is out of operation for
several days, you must put 5-10 droplets of special
compressed air oil into the compressed air supply
before switching it on. Only store your compressed
air tool in dry rooms.
13.2. Other maintenance
The device has no further internal parts that require
maintenance.
The guarantee does not cover:
• Wearing parts
• Damage due to impermissible working pressures.
• Damage due to untreated compressed air.
• Damage caused by improper use or external inter-
vention.
14. Repairs
After repairs or maintenance, make sure that all safe-
ty-related parts are installed and are in perfect condition.
All parts which may cause injury must be kept where
they are inaccessible to children or others.
Attention: According to the German Product Liabili-
ty Act, no liability is accepted for damage caused by
improper repairs or by not using original spare parts.
Such work should be performed by a customer service
centre or an authorised specialist. The same applies to
accessory parts.
22 | GB
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
Important note in the case of repairs:
When returning the product for repair, for safety reasons,
ensure that the product is free of oil and fuel when it is
sent to the service centre.
14.1 Ordering spare parts
Please provide the following information when ordering
spare parts:
• Model designation
• Item number
• Type plate data
14.2 Service information
With this product, it is necessary to note that the follow-
ing parts are subject to natural or usage-related wear,
or that the following parts are required as consumables.
Wearing parts*: Chisel
* may not be included in the scope of delivery!
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
15. Disposal and recycling
Notes for packaging
Fuels and oils
• Before disposing of the unit, the fuel tank and the mo-
tor oil tank must be emptied!
• Fuel and engine oil do not belong in household waste
or drains, but must be collected or disposed of sep-
arately!
• Empty oil and fuel tanks must be disposed of in an
environmentally friendly manner.
www.scheppach.com
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.