Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DM600MAX
APO
Brightness
BEEP
Wireless Link
Resolution
Temperature
Continuity
Chart
Clear MEM
Clear LOG
RESET
Version
• APO
If you don't operate the rotary switch or buttons for a specified time, the meter will turn
off automatically to save the power of batteries. The default APO timer is 10 minutes. In
setup mode, you can change the APO timer.
When you open this function, the status will be displayed in the top right corner of the
screen.
• Buzzer
The meter equip a 2.7kHz tone buzzer. Valid button press: Beep once. And invalid
button press: Beep twice. In setup mode, you can turn on or off the buzzer. But the
buzzer in continuity check cannot be turn off.
When you close this function, the status will be displayed in the top right corner of the
screen.
Setup Options
1min to 30min, or OFF
1 to 5
Buzzer ON or OFF
ON or OFF
High or Low
Temperature default unit: °C or °F
Continuity threshold: 10Ω to 50Ω
Chart graph: Trend or BAR
Clear save data: YES or NO
Clear LOG data: YES or NO
Reset setting: YES or NO
Display the current version
6
EN
Werbung
