Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DM600MAX
To use temperature measurement, turn the rotary switch to mV position, then press
MODE to select measuring mode.
HOLD
When you press the HOLD key, the MENUBAR will display three options.
In the normal measurement mode, you can press the HOLD button to freeze the value
on the screen.
• Auto-HOLD
When measuring, in the HOLD function, you can press F3 to start the Auto-Hold mode.
In this mode, the meter holds reading and shows it on the secondary display.
If the difference between new reading and hold reading is bigger than 5d (3¾-digit
mode), and new reading is also stable, then meter automatically holds a new reading
on the secondary display.
When reading is smaller than Auto-Hold limit, or reading is OL, the Auto-Hold mode is
not working.
Function
V
A
R
C
Hz
Diode/Temperature
To exit Auto-Hold mode, press F3 again. When Auto-Hold mode is disable, the hold
mode is not update any new reading.
Trigger level(>)
1% of all range
0.1% of all range
No limit
1% of all range
0.1% of all range
No limit
19
Update condition
Record the values once the
variation exceeds ±5D(Low
resolution) and the readings
have stabilized
EN
Werbung
