Power Probe DM600MAX Benutzerhandbuch Seite 15

DM600MAX EN
The ranges of measuring current are 40mA, 400mA, 4A and 10A. AC current is
displayed as an rms value. Insert the black lead into the COM terminal. For currents
less than 400 mA, insert the red lead into the mA/µA terminal. For currents above 400
mA, insert the red lead into the A terminal.
A/mA
A/mA
In AC mode, the frequency may be show dashes if the signal is smaller than the min.
sensitivity and trigger level. Please see "Sensitivity and Trigger level" table in the
specification section of Frequency.
13