Power Probe DM600MAX Benutzerhandbuch Seite 22

DM600MAX EN
• Peak-HOLD
The Peak-Hold mode records wave peak maximum and minimum input values.
To use the Peak-Hold mode, in the HOLD function press the PeakHOLD button to
enable the Peak-Hold mode in the AC or DC measurements. In this mode, you can see
both peak MAX or MIN value. Each time the maximum or minimum value is exceeded,
the value at the bottom will be updated.
You can press the Freeze button to pause updating the values at the bottom; an icon
will appear in the top left corner.
Pressing the Restart button will update the values at the bottom to the latest readings.
To exit Peak-Hold mode, press cancel.
• Maximum / Minimum
When measuring, you can record the maximum, minimum and average value of
reading.
In the HOLD function and press MIN MAX to use maximum / minimum mode. In this
mode, the meter records each data to compare the maximum and minimum value. Also,
meter calculates the average of reading.
When maximum / minimum record mode running, if you wants to pause recording,
press the Freeze button. Press again to continue.
To exit maximum / minimum record mode, press the CANCEL button.
20