Optos P200 Einführungshandbuch Seite 18

Chapter 3 - Safety Guidelines
3.9 Device failure
In the unlikely event you hear a loud noise from the
device, see smoke or smell burning, stop imaging
and isolate the device by unplugging.
Warning
If you suspect the device may be faulty check the
Troubleshooting section in the application's help
file. If in any doubt on how to proceed, contact
Warning Optos, see Contact us on page 31 .
3.10 Cleaning and biocompatibility
If these guidelines are not followed there is the
possibility of biocompatibility problems. These risks
will be minimized if you clean the eye piece as
defined in the Cleaning section, see Cleaning
Instructions on page 23 .
Carry out the cleaning procedures regularly. This
Warning
will ensure a high level of patient interface hygiene
and consistently successful images. No other user
maintenance is required.
3.11 Symbol and label information
Switch - off position.
Switch - on position.
Protected earth connection.
Danger: high voltage warning.
Warnings are directions which, if not followed,
could cause:
Page 12 of 34
English
fatal or serious injury to a user,
l
engineer, patient or any other
person
damage to the equipment described
l
in this manual and/or other
equipment or goods
environmental pollution.
l
Part Number: G95990/9GWE
Copyright 2014, Optos plc. Allrights reserved.