Optos P200 Einführungshandbuch Seite 13

3 Safety Guidelines
Your system is a medical device and, as such, should be operated within the
safety parameters and instructions defined in this Introductory Handbook ,
the User Assistance and the Technical Data Specification .
To ensure validity of certification, do not replace any part of the device. If the
device appears faulty or has non-functioning components, please contact
Optos, see Contact us on page 31 .
If you have any questions regarding the correct use of your device, please
contact Optos before attempting to operate the device.
Please read these Safety Guidelines before using your device.
3.1 General safety
Only Optos trained personnel are permitted to
install and service the device.
Your device will be installed by Optos trained
personnel. Do not operate the device until they
have completed the installation and training.
Do not move the scan head or scan head table.
Warning
Do not remove the scan head casing. There are no
user serviceable or replaceable parts inside.
Do not capture images when the eye piece is not in
place.
Capture
The
review images for diagnostic purposes.The scan
head monitor should not be used to review images
for diagnostic purposes.
Always wear powder-free gloves when cleaning
the device. If gloves become contaminated in any
way they must be disposed of and replaced
immediately.
Do not use lint cloths, tissues, or other materials
Warning that may create dust, near the scan head.
Restarting the PC used to store the
database and images
Ask users to logout of their PCs before you shut
down the Image Server PC. Ask Viewing PC users
to close any Optos applications before you shut
down the Image Server PC.
Part Number: G95990/9GWE
Copyright 2014, Optos plc. Allrights reserved.
Chapter 3 - Safety Guidelines
application should not be used to
Page 7 of 34
English