Optos P200 Einführungshandbuch Seite 15

Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Warning
Guidance for use on patients with Epilepsy
The device uses flashes of laser light. Some
patients with epilepsy may be sensitive to flashes of
light. Caution should be exercised for patients who
have a history of reaction to camera flashes or
strobe lighting.
Working in Low Light Conditions
The device requires low levels of room light to
operate efficiently. Take care to avoid accidents
when working under low light conditions.
Taking Measurements
After you have drawn the points on the image, the
Warning
software can estimate the relative distance
between any two points. The calculated distance is
an estimate only and may be used to indicate a
need for further review. The measurements of
relative distance, however, should not be used as
an indication of a specific condition or disease. The
size and shape of an image depends on the type of
device used to capture it. Images from different
types of device should not be compared.
Measurements in 3rd party viewers may not be
accurate.
Optical Elements
Do not place any optical elements (with the
exception of the patient wearing contact lenses)
Warning
between the device and the patient's eye.
3.3 Peripherals
Only use peripherals supplied with the device.
Independently sourced peripherals may not be
compatible. Contact Optos for more information on
compatible peripherals, see Contact us on page
31 .
Do not connect a printer to the scan head console
Warning or power a printer from the scan head.
Only power the scan head from the scan head
connector. Do not power any other electrical
equipment from the scan head table.
Part Number: G95990/9GWE
Copyright 2014, Optos plc. Allrights reserved.
Chapter 3 - Safety Guidelines
Page 9 of 34
English