Parkside PGHSA 12 C2 Bedienungsanleitung Und Originalbetriebsanleitung Seite 40

˜ Residual risks
Even if properly operating and handling the
product, some residual risks will remain. Due to its
construction and build, the product may present
the following hazards:
Cuts
Hearing loss if working without hearing
protection.
Damage caused to your health resulting from
hand/arm vibrations if the power tool is used
over a longer period of time or if it is not
properly used and maintained.
WARNING!
m
This product produces an electromagnetic
u
field during operation! This field may under
some circumstances interfere with active or
passive medical implants! To reduce the risk
of serious or fatal injury, we recommend
persons with medical implants to consult
their doctor and the medical implant
manufacturer before operating this product!
˜ First use
˜ Accessories
To operate this product safely and correctly,
always wear suitable personal protective
equipment.
This includes:
Safety goggles
Hearing protection
Protective gloves
Protective footwear
˜ Unpacking
1. Open the packaging and remove the product
carefully.
2. Remove the packaging material as well as
the packaging and transport bracing (if
available).
3. Check that the delivery is complete.
4. Check the product for transport damage.
m WARNING!
The product and packaging materials are
u
not toys! Children must not be allowed
to play with plastic bags, film and small
parts! There is a risk of swallowing and
suffocation
˜ Assembly
WARNING!
m
Always wear protective gloves when
u
working with the pruning saw, and use
original parts only. Switch off the product
and remove the battery pack
doing any work on the pruning saw. Risk
of injury!
Before operating the pruning saw, you must:
adjust the saw chain tension
lubricate and insert the battery
˜ Assemble the blade bar and
saw chain
m WARNING!
Switch off the product and remove the
u
battery pack before carrying out any
[ 14 ]
maintenance work!
1. Place the product on a level surface.
2. Turn the mounting screw
cover in an anticlockwise direction
order to remove the sprocket cover
3. Spread out the saw chain
so that the cutting edges are aligned in a
clockwise direction. Use the graphical symbol
on the blade bar
11 ] [
sprocket as a guide to align the saw chain
17 ] [
.
12 ] [
before
[ 14 ]
of the sprocket
10 ] [
in
.
[ 9 ]
in a loop
[ 12 ]
or above the chain
Direction of travel of the
saw chain.
GB/IE 39