Parkside PGHSA 12 C2 Bedienungsanleitung Und Originalbetriebsanleitung Seite 35

Sound pressure level L
PA
Uncertainty K
PA
Sound power level L :
WA
guaranteed
measured
Uncertainty K
WA
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Vibration (a )
h
m WARNING!
Wear ear protection!
u
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on the
manner in which the tool is used, especially
what kind of work-piece is processed.
It is necessary to identify safety measures
u
to protect the operator that are based on
an estimation of exposure in the actual
conditions of use (taking account of all
parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time).
NOTE
The declared vibration total value and
u
the declared noise emission value have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared total vibration value and the
u
declared noise emission value may also
be used for a preliminary assessment of
exposure.
34 GB/IE
76.2 dB(A)
2.40 dB
90 dB(A)
87.2 dB(A)
2.4 dB
2.205 m/s²;
K= 1.5 m/s²
General safety
instructions
˜ Genral power tool safety
warnings
m WARNING!
Read all safety warnings, instructions,
illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.