Parkside PGHSA 12 C2 Bedienungsanleitung Und Originalbetriebsanleitung Seite 44

˜ Troubleshooting
Problem
Device does not start
Inferior cutting
performance
Saw runs with
difficulty, chain comes
off
Chain becomes hot,
smoke development
during sawing,
discolouration of the
rail
˜ Cleaning and maintenance
m WARNING!
Maintenance and cleaning work must
u
always be carried out with the motor
switched off and the battery removed. Risk
of injury!
Have any repair and maintenance work
u
that is not described in this user manual
carried out by our specialist workshop.
Only use original spare parts. Allow the
u
product to cool off before undertaking any
maintenance or cleaning work. There is a
danger of burns!
Use cut-protection gloves when handling
u
the chain or the chain bar. Risk of cuts!
Switch off the product and remove
u
the battery before carrying out any
maintenance work.
Possible cause
The battery pack is
[ 14 ]
empty or not inserted
Defective On/Off switch
[ 4 ]
Defective motor
Incorrectly mounted saw
chain
12 ] [
Saw chain blunt
12 ] [
Chain tension insufficient Check chain tension
Chain tension insufficient Check chain tension
Too little chain oil
Fault correction
Check the charge level. and have repairs carried
out by a qualified electrician, if necessary.
Have repairs carried out by a qualified
electrician, if necessary.
Mount saw chain correctly
Sharpen cutting teeth or place on new chain
Chain lubrication
˜ Cleaning
Clean the machine thoroughly after every use.
In this way, you extend the life of the machine
and avoid accidents.
Keep the gripping handles free of petrol, oil
or grease. Clean the gripping handles, where
appropriate, with a moist cloth soaked in
soap. Use no solvents or petrol for cleaning!
Clean the saw chain after every use. Use a
paint brush or wipe for that. Do not use any
liquids to clean the chain. After cleaning, oil
the chain lightly with chain oil.
Clean the ventilation slots and the surfaces of
the machine with a paint brush, whisk or dry
cloth. Do not use any liquids for cleaning.
GB/IE 43