Silvercrest SDG 950 C3 Kurzanleitung Seite 18

have ingredients that may attack and
soften the silicon feet. If necessary,
place a non-slip mat under the device.
Do not use any astringent or abrasive
cleaning agents.
Overview
1 Lid
2 Rice tray
3 Steamer baskets
4 Steam outlet
5 Collector
6 Handles with filling opening
7 Steam sleeve
8 Recess (at the edge of the steam sleeve)
9 Bottom part
10 Time selector (adjustable from 0 to
75 minutes)
11 Operating display (red)
12 Water level indicator MIN / MAX
13 Steam generator
14 Power cable with power supply plug
15 Numbers of the steamer basket
16 Steam vents
17 Cable spool
16 GB
Before using for the first
time
FIRE HAZARD!
Before turning the device on, place it on
a level, stable, dry, heat-resistant sur-
face.
DANGER! Risk of injury
through burning!
The surfaces of the device become very
hot during operation. During operation,
only touch the time selector 10 and han-
dles 6 of the device.
NOTE: as the appliance is supplied with a
thin film of grease, there might be a small
amount of smoke and odour the first time
it is used. This is not harmful and will stop af-
ter a short while. Please ensure adequate
ventilation during this process.
• Clean the appliance before using
it for the first time!
1. Place the appliance on a level, dry,
non-slip surface so that the appliance
can neither fall over nor slide off.
2. Figure E: place the steam sleeve 7
onto the steam generator 13 in such a
way that the recess 8 on the steam
sleeve points to the front left corner. The
recess 8 fits over the small plastic tab
at the bottom of the bottom part 9.
3. Pour 400 ml of clean drinking water
into bottom part 9.
4. Put collector 5 in bottom part 9.
5. Place steamer baskets 3 on bottom
part 9.
NOTE: ensure that the steamer baskets 3
are in the right sequence, as they are slightly
different sizes. Order from top to bottom:
steamer basket 3 on top of steamer
basket 2, steamer basket 2 on top of steam-
er basket 1. Steamer basket 3 cannot be di-
rectly placed on top of steamer basket 1.