Parkside PART 20-Li A1 Originalbetriebsanleitung Seite 28

GB MT
Warning! Do not touch mov-
•
ing dangerous parts until the
battery has been removed
and the moving dangerous
parts have come to a com-
plete stop.
Never replace the non-metal-
•
lic cutting unit with a metallic
cutting unit.
Avoid an abnormal body pos-
•
ture. Ensure secure footing at
all times to maintain balance
when working on slopes.
Go slowly. Do not walk with
•
the device in your hand.
Make sure to keep the ventil-
•
ation openings free of foreign
objects.
Switch off the device and re-
•
move the battery (17). Make
sure that all moving parts
have come to a complete stop
when leaving the device,
•
before removing obstruc-
•
tions or loosening block-
ages,
before checking the device,
•
cleaning it or performing
maintenance work on it.
After contact with a foreign
•
object,
if the machine begins to vi-
•
brate in an unusual way.
28
If the device starts to vibrate
•
abnormally, an immediate
check is required, remove the
battery and:
examine for loose parts and
•
tighten these,
search for signs of damage,
•
replace damaged parts.
•
contact the service centre.
If an accident or mal-
•
function occurs during
operation, switch off
the device immediately.
Injuries must be prop-
erly treated or medical
assistance sought. Read
the "Troubleshooting" section
to correct any malfunctions or
contact our Service Centre.
Only use accessor-
•
ies recommended by
PARKSIDE. Unsuitable ac-
cessories may cause electric
shock or fire.
Cleaning, maintenance
and storage
Switch off the drive and re-
•
move the battery. Wait until
all moving parts have stopped
and allow the device to cool
down when the device is
stopped for maintenance, re-
pair, storage or replacement
of an accessory.