Troubleshooting - Parkside Part 20-Li A1 Originalbetriebsanleitung

GB MT
Waste electrical and electronic
equipment (WEEE) must not be
disposed of with domestic waste.
The symbol of the crossed-out wheeled bin
means that this product must not be dis-
posed of as unsorted municipal waste at
the end of its useful life.
Directive 2012/19/EU on waste
electrical and electronic equip-
ment:
Consumers are legally obliged to recycle
electrical and electronic equipment in

Troubleshooting

The following table will assist you in fixing faults:
Problem
Device does not start
Device works with interrup-
tions
Strong vibrations, loud noises
34
an environmentally sound manner at the
end of its life. In this way, environmentally
friendly and resource-saving recycling is
ensured.
Depending on the implementation in na-
tional law, you may have the following op-
tions:
• Return to a shop,
• Hand over to an official collection
• Return to the manufacturer/distributor.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.
Possible cause
Rechargeable battery (17)
discharged
Rechargeable battery (17)
not inserted
On/Off switch (2) is broken
Defective motor
Internal loose contact
On/Off switch (2) is broken
Cutting unit dirty
Defective motor
point,
Troubleshooting
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)
Inserting the battery,
p. 32
contact the service centre.
contact the service centre.
Clean the cutting unit (see
Cleaning, maintenance and
storage, p. 32)
contact the service centre.