probst XS-JET-80-GRABO Betriebsanleitung Seite 39

Operation
4.2.4 Changing the battery
•
To remove the battery from the
XS-JET-80-GRABO device, pull the safety
catch down towards the battery (1).
•
The battery can now be removed.
•
To reinsert a battery into the
XS-JET-80-GRABO device, insert the battery
into the guide lugs and press it down until it
audibly clicks into place.
4.2.5 Charging the battery
1) Connect the mains plug to the charger.
2) Connect the mains plug of the charger to a
socket.
3) Insert the battery into the charger.
4) The battery is charged as soon as it is
connected to the charger.
5) The charging process ends automatically as
soon as the battery is fully charged.
•
The battery is supplied with the device in a partially charged state and must be fully charged
before first use.
•
The charging time is approx. 1.5 hours (fully charged). When the battery is fully charged, the
operating time of the vacuum pump is approx. 0.5 hours.
Only the supplied battery charger may be used!
•
Ensure that the mains voltage matches the data on the charger's rating plate.
•
The charger may only be used in a dry environment.
The charger is not waterproof!
•
Keep the battery away from flammable objects during charging!
58500018 15 / 21 GB