probst XS-JET-80-GRABO Betriebsanleitung Seite 33

General
3 General
3.1 Authorized use
•
The device is only designed for the use specified in this documentation.
•
Every other use is not authorized and is forbidden!
•
All relevant safety regulations, corresponding legal regulations, especially regulations of the
declaration of conformity, and additional local health and safety regulations must be observed.
Prior to every operation the user must ensure that:
•
The equipment is suited to the intended operation
•
the functioning and the working condition of the equipment is examined
•
the load is suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
The XS-JET-65-GRABO device is an electric hand-held vacuum cleaner that has a load capacity (WLL)
of up to 80 kg (176 lbs) and can suction itself onto almost any surface. This makes the device suitable
for suctioning and then lifting, moving and laying materials with smooth and absorbent surfaces, such
as tiles, natural stone, concrete and marble slabs, glass and drywall panels.
The materials specified here are for guidance only. If necessary, preliminary tests must be
carried out before suctioning/lifting to ensure that the transported goods are not damaged!
There is a risk of breakage with thin materials due to the vacuum that builds up during the
suction process. Sufficient inherent stability of the material is therefore a prerequisite!
•
The maximum load capacity (WLL) is 80 kg (176 lbs) when the appliance is held horizontally.
•
The maximum load capacity (WLL) must never be exceeded!
The load could come loose and fall down. Risk of injury!
The XS-JET-80-GRABO device is not suitable or intended for climbing or for supporting the
weight of a person. Using the device for climbing or for any other unintended purpose may
result in injury or death.
58500018 9 / 21 GB