Silvercrest SPDVD 1A1 Bedienungs- Und Sicherheitshinweise Seite 75

Select slide show
transitions
You can select different transitions to switch
from one image to the next.
During the slide show, press
[
PROGRAM
name of the desired transition appears
in the upper left corner of the screen.
During the slide show, press
[ ]
repeatedly to select
REPEAT
following repeat modes:
–
REPEAT ONE
–
REPEAT FOLDER
–
FOLDER
–
SHUFFLE
–
RANDOM
–
SINGLE
During the slide show, press
[ ]
. Press
ZOOM
zoom in and out.
Connecting an external video
source to the DVD player or second
monitor
Use the AV cable
media player to the AV IN socket
of the DVD player A or to the AV IN
[ ]
socket of the second monitor B. The
media player must have a composite
video and RCA audio output.
To display the video from the media
player on the DVD player A, press
[ ]
. Press
SOURCE
In. Press ENTER
AV
Second monitor B: The video will be
displayed on the screen automatically
once the media player is connected.
74 GB/IE
]
repeatedly until the
[ ] [ ]
or to
[ ]
to connect a
6 ] [
[ ]
to select
[ ]
to confirm.
Cleaning
m
WARNING! Risk of fatal injury
from electrocution! Disconnect the
product from the power supply before
you start cleaning.
m
ATTENTION! Risk of product
damage! To avoid irreparable
damage to the product, ensure that no
moisture can get into the product during
cleaning.
Do not use any caustic, abrasive or
solvent-based cleaning agents. They can
damage the screen and the surfaces of
the product.
In general, the laser unit does not
require cleaning. We do not recommend
the use of cleaning media.
Clean the housing and the screen of the
product with a soft, dry cloth.
Use a commercially available screen
cleaner for cleaning the screen.