Silvercrest SPDVD 1A1 Bedienungs- Und Sicherheitshinweise Seite 62

m
ATTENTION! The USB port is
designed for use with USB flash drives
only. Other external storage media,
such as external hard drives, cannot be
operated via the USB port. There is a
risk of product damage.
Insert a USB flash drive into the USB
[ 7 ]
port on the left side of the DVD
player A to play files from the USB flash
drive.
Connecting SD/MMC memory cards
You can insert an SD/MMC memory card
into the memory card slot
audio, video, or image files.
Insert the memory card into the memory
1 ] [
card slot on the top side of the
DVD player A with the contacts facing
towards the screen and the bevelled
corner at the bottom.
[ 1 ]
to play back
SD
SD/MMC
Selecting the playback
source
The default playback source of the product
is "DVD". If other media (USB flash drive or
SD/MMC memory card) are inserted, you
can switch between the playback sources.
[
Press SOURCE
source list. You can choose between
and Media. To select
DVD, AV In
USB/SD/MMC as the playback source,
[ ]
press and select Media. Press
[ ]
. Press
ENTER
and SD. Press ENTER to confirm
USB
the selection. When the DVD drive is
selected as the playback source, DVD
or CD is displayed at the top left of the
screen after the data is read.
Adjusting the volume/
muting
Adjust the volume using VOL +
[ ] [
or VOL –
To adjust the volume of the second
monitor B separately, use VOL +
[ ]
.
VOL –
NOTE: Press VOL +
the volume of the DVD player A up to
level 10. A message will appear to warn
you of possible hearing damage at high
volume. You cannot increase the volume
up to level 20 until you have confirmed
this message with ENTER
]
to pop up the
to select between
[ ] [
]
.
[ ]
or
[ ]
to adjust
[ ] [ ]
.
GB/IE 61
]