Silvercrest SPDVD 1A1 Bedienungs- Und Sicherheitshinweise Seite 59

NOTE: Depending on the diameter of
your headrest supports, use either the
pre-assembled screws or the supplied
long fixing screws
Hold the DVD player with both hands
and insert the angled support into the
support bar until it clicks into place.
Ensure the entire unit is secure.
Press the angle bracket into the holder
of the clamp until it is fully engaged.
Check that the angle bracket and the
DVD player A are fitted securely.
58 GB/IE
[ ]
.
Undo the side screw on the angle
bracket and set the desired inclination
angle of the DVD player A.
Secure the position by tightening the
side screw again.
Mounting using the
securing straps
The DVD player A and second
monitor B can be mounted to the
headrest using the securing straps
[ ]
.