Operation
Controls
The DVD player A and the second
monitor B have a number of controls
and buttons that you can use to control
the main functions.
In addition to the basic controls, the
remote control C also provides numerous
additional options for using all the
functions of your product.
These operating instructions refer mainly
to the buttons on the remote control C.
If the instructions refer to the controls
of the DVD player A or the second
monitor B, it will be expressly stated.
If you select a function that is not
possible with the inserted media or not
available in the current mode or at the
current time, following icon is shown on
the screen:
Switching on/off
There is an ON/OFF switch
side of the DVD player A and the second
monitor B.
NOTE: Switching off the DVD player A
also switches off the power to the
second monitor B.
Slide the ON/OFF switch
ON position to switch on the product.
The LEDs on the
red when switched on.
60 GB/IE
3 ]
[
[
]
on the
3 ]
[
[
]
to the
[
]
buttons
light up
Slide the ON/OFF switch
OFF position to switch off the product.
The LEDs on the
off.
Inserting/connecting a
data medium
Inserting a DVD/CD
Slide the disc compartment release
2 ]
[
on top of the DVD player A
OPEN
to the right. Fold the screen
to open the disc tray.
Insert the DVD/CD so that the label side
is facing up and press it carefully onto
the retaining hub in the middle until the
DVD/CD clicks into place.
To close the disc compartment, gently
[
push the screen
it click into place.
DVD/CD playback normally starts
automatically after a few seconds.
You may need to press
menu may appear asking you to make
a selection using the navigation keys
[
]
.
Connecting a USB flash drive
You can connect a USB flash drive to the
7 ]
[
USB port
to play audio, video, or image
files.
m
ATTENTION! Do not use a USB
extension cable. Do not connect the
product directly to the USB port of a
computer. There is a risk of product
damage.
[
3 ]
[
]
to the
[
]
buttons
turn
[
]
forward
]
back until you hear
[
]
or a