Silvercrest SPDVD 1A1 Bedienungs- Und Sicherheitshinweise Seite 57

Connecting the second
monitor
The product is delivered with a second
monitor B which you can connect to the
DVD player A. This allows you to play the
content on 2 monitors simultaneously.
Connect the jack plugs of the AV/DC
connection cable
[ 5 ]
socket (DVD player A) and the
[
AV IN socket
Connect the coaxial power connectors
of the AV/DC connection cable
the DC OUT socket
and the DC IN socket
monitor B). This will supply the second
monitor B with the required operating
voltage.
Further connection options
Headphone jack
The DVD player A and the second
monitor B each have a headphone jack
[ 4 ] [ ]
suitable for 3.5 mm jack plugs.
As soon as you connect the earphones, the
sound is played back via the earphones. The
speakers are automatically muted.
56 GB/IE
[ ]
to the AV OUT
]
(second monitor B).
[ ]
to
8 ] [
(DVD player A)
[ ]
(second
Be careful when using the
earphones! Long-term use of
earphones at a high volume
can damage the user's hearing.
Always set the volume to a
low level first and adjust it to a
comfortable level. Always use
earphones in such a way that you
can hear the surrounding noise.
m
WARNING! Use only the supplied
[ ]
earphones , type SPDVD 1 A1. Other
earphones could produce harmful sound
pressure.
NOTE: The supplied earphones
may only be used on the DVD player A
and the second monitor B.
m
WARNING! Before putting on the
[ ]
earphones , reduce the volume to
minimum.
Connection to an external device
You can also play the picture and sound
signal from the DVD player A on an external
device, such as a TV.
Insert the 3.5 mm jack plug of the AV
[ ]
cable into the AV OUT socket
the DVD player A.
[ ]
5 ] [
of