Silvercrest SPDVD 1A1 Bedienungs- Und Sicherheitshinweise Seite 60

Fitting the securing straps on the
DVD player / second monitor
Guide the ends of the thin straps through
the first strap slots at the back of the
DVD player A / second monitor B.
Guide the strap end through the loop
on the wide strap. The buckle must be
located at the top of the screen.
Guide the end of the thin strap through
the other strap slots on the DVD
player A / second monitor B.
Attaching on the headrest: Ask another
person to hold the DVD player A /
second monitor B in place. Wrap the
straps and buckle around the headrest.
Guide the end of the securing straps
through the buckles on the other end of
the securing straps. Pull the straps tight.
m
ATTENTION! Tighten the straps before
commencing any journey.
Loosening the straps: Place your tip of
the finger into the recess at the end of
the buckles. Pull the strap outwards. If
desired, you can pull the strap out of the
buckle.
NOTE: Ask another person to hold the
DVD player A / second monitor B when
you loosen the straps.
GB/IE 59