Silvercrest SPDVD 1A1 Bedienungs- Und Sicherheitshinweise Seite 58

Connect the external device via the
cinch connectors of the AV cable
Connect the yellow cinch plug to the
video input as well as the red cinch plug
to the right and the white cinch plug to
the left audio input of the desired device.
Mounting the DVD player
in a vehicle
Use the supplied headrest bracket
[
the securing strap
product behind the headrest of a front seat.
m
WARNING! Do not fit the headrest
[ ]
bracket in the deployment area of an
airbag. When the airbag is deployed, it
releases high impact pressure which can
hurl the headrest bracket, the securing
[ ]
strap and the product through the
vehicle interior.
m
WARNING! Before each journey,
make sure that the headrest bracket
the securing strap
are still securely fastened and cannot
come loose unexpectedly.
m
WARNING! Do not leave the product
unattached inside the vehicle, as it may
fly through the interior of the vehicle
during jerky manoeuvres or in an
accident.
[ ]
.
[ ]
and
]
to securely secure the
[
[ ]
and the product
Screw the angle bracket into the
threaded hole on the back of the DVD
player A.
NOTE: The angle brackets offer
3 different sets of mounting holes. This
allows you to mount the DVD player A
and the second monitor B at different
heights.
Remove the 4 screws from the
]
,
headrest bracket clamp (tool: Phillips
screwdriver).
Place the clamp of the headrest bracket
around the headrest supports. Tighten
the clamp with the 4 screws.
GB/IE 57