Silvercrest SPDVD 1A1 Bedienungs- Und Sicherheitshinweise Seite 66

Programming the
playback order of tracks
With this programming function you can
play up to 20 chapters (DVD) or tracks
(audio CD) in an order of your choosing.
This function is not available for MP3 media.
Press PROGRAM
10 program positions is shown on the
screen:
1 TT: CH:
TT: CH:
2
3 TT: CH:
TT: CH:
4
TT: CH:
5
EXIT
1 TT: CH:
TT: CH:
2
TT: CH:
3
TT: CH:
4
TT: CH:
5
Exit
Enter the desired track (TT) for program
position 1 using the numbers on the
numeric keypad
numbers, press 10+ repeatedly for the
tens, then a numeric key for the second
digit.
Enter the desired chapter (CH) for
program position 1 using the numbers
on the numeric keypad
NOTE: Chapter numbers are not
applicable for audio CDs.
[ ]
. A table with
TT: CH:
6
TT: CH:
7
8 TT: CH:
TT: CH:
9
TT: CH:
10
TT: CH:
6
TT: CH:
7
TT: CH:
8
TT: CH:
9
TT: CH:
10
[ ]
. To enter two-digit
[ ]
.
After input, the cursor jumps to the next
program position.
Enter additional program positions in
the same way. To enter 10 additional
program positions, move the cursor to
the entry at the bottom of the menu
using the navigation keys
[ ]
. Confirm with ENTER
If you select the
EXIT
bottom of the menu, the programming
function is aborted. All settings will be
lost.
Starting a programmed
playback sequence
As soon as the first program position has
been entered,
PLAY
of the menu.
Use the navigation keys
to move the cursor to
[ ]
. The preprogrammed
ENTER
playback sequence starts.
is permanently displayed on the screen
during playback.
Use PROGRAM
program. To clear the program, use the
navigation keys
cursor to CLEAR. Press ENTER
To stop playback and clear the
programmed playback order, press
[ ]
twice.
[
entry at the
is shown at the bottom
[ ]
and press
PLAY
PROGRAM
[ ]
to call up the
[ ]
to move the
[ ]
.
GB/IE 65
]
.